Heat Pumps Ireland
 
Heat Pumps Galway


   

Under Floor Heating Systems

Climate Control are exclusive distributors for Gabotherm underfloor and wall heating systems in Ireland. Gabotherm are based in Niederwinkling, Germany and have been producing plastic piping and underfloor heating systems since 1969 and their piping range have attained almost every possible quality certificate.

Underfloor heating is the most comfortable and unobtrusive heating system that can be installed in a home. Because the heat comes from beneath, the temperature at floor level is slightly higher than at head level creating the perfect environment of warmer feet and cooler head. The heat is spread evenly throughout the house eliminating the cold and hotspots associated with radiators.

Climate Control design your system taking into account heat loss from doors, windows, walls, floors and ceilings. A low water temperature design allows you to get the highest efficiency from your system. The system can be used with all types of floor coverings including tiles, wooden floors, parquet and vinyl, although thick carpets should be avoided. Underfloor heating can also be fitted on joisted floors. There are various different methods of installing on joisted floors, which can be discussed with Climate Control.


click for larger

KB 12 Installation


click for larger

gabo-TAC Insulated Mat




 How it works?
Underfloor heating works by placing circuits of plastic pipe on a bed of insulation and covering them with a sand-cement (screed) mixture between 63 and 73mm thick. Warm water is then circulated through these pipes, which heats the screed acting as a heat store. The heat is then released slowly from the screed, which once heated can maintain its temperature for up to 6 hours, and heats the room evenly creating the perfect comfort zone where the upper part of the room is slightly cooler than the lower.

 Heat up
Some people express concern as to the reaction time of underfloor heating systems. In a properly designed system, this slow start up refers only to the initial heating of the screed, which would take about 3-4 hours to reach temperature. Once temperature is reached the screed temperature should be 'topped up' when the temperature drops. A heatpump or boiler would do this automatically. The screed should not be allowed to cool fully unless the system is being shut down

  Advantages

 Invisible – the system is hidden beneath the floor allowing flexibility in interior design
 
Safe – no sharp edges from radiators, no hot pipes
 
Comfort – warm dry floors produce even, comfortable heat throughout every room
 
Maintenance free - no awkward or restrictive voids to paint behind
 
Healthy – creates no convection currents of air which carry dust and affect asthma sufferers



 Economic

Under floor heating delivers amazing comfort and economy when coupled with renewable energy systems such as a
geothermal heatpump

 Control
There are many possibilities for controlling your underfloor heating system. The system can be fitted with thermostats in one or all zones in order to increase controllability. These thermostats can be either analog or digital, incorporating time programs, set temperatures etc. We can also offer control systems that allow you to adjust the temperatures or switch on / off the system through the internet or simply from a tone dial phone.

Alternatively if used with a heatpump, the heatpump can be used to control the system.

 

 

 

 

                Pressure Test


 

 




Climate Control
 offer a number of variations of underfllor heating systems, offering a system to suit each need. Take a browse through our different systems;

 gabo-TAC
 gabo-1.2.3
 KB 12
 GTF-70


Copyright © 2006 Climate Control, All rights reserved. Website Marketing by Western-Webs, Tuam, County Galway, Ireland